Confined Space Work Environments

Home > Industrial Painting > Confined Space Work Environments
SHARE
Facebook Share Twitter Share LinkedIn Share
Tripod Lowering into Confined Space Environment at DuPont Manufacturing, in Parlin, New Jersey Confined Space Work Environments

Painting and surface preparation in confined spaces

There is plenty to know about planning and executing a surface restoration project in a confined environment. This is high risk work that should only be trusted to an experienced team having the proper safety and procedural qualifications.

The types of projects that encompass this designation include storage tanks, silos, water towers, process vessels, pipelines, vaults and more. Interior surface maintenance protects the quality of the contents and the integrity of the structure.

The selection decisions for choosing a contractor to perform surface preparation in confined space and painting in confined areas begins with a careful understanding of the safety issues. Hazardous atmosphere, limited entry and egress, oxygen deficiency, and physical hazards are some of the many factors that must be considered.

That’s where we come in. Alpine Painting and Sandblasting Contractors has more than three decades of experience working in hazardous environments. Our documented safety plans and confined space certifications are your assurance of our respect and attention to safety first practices.

Following procedural guidelines, performing surface preparation thoroughly and applying specialized coatings correctly is something we do very well. We are professionals with over 40-years of experience satisfying industrial facility operators, site managers, third-party inspectors and compliance officials.

For more information on confined space services contact Alpine today.

Ben Scaturro Jr.
Schedule an Estimate

Call Ben Scaturro Jr, Industrial Painting Specialist, at (973) 279-3200 x212 or use our online application

Get Started
Ed - your periodic phone updates about the progress of the work are great. Keep up the solid work....”
James McCann, Community Manager
First Service Residential
Dave, I know we just spoke but I wanted to email and thank you and your guys again for doing such a great job today. The Ballroom looks like it did when it was newly remodeled a few years back....”
Randy Polo, General Manager
Smoke Rise Village Inn
Sherwin Williams is Proud to be associated with your company. It is very evident of why Alpine is a leader in the industry and why you are so sucessful during these turbulent times....”
Pete Ippolito, President & General Manager Mid Western Division Paint Stores Group
Sherwin Williams
The below is to certify that Alpine Painting`s team of professionals went above and beyond our expectations to make our high-rise resurfacing and waterproofing project go smooth and with no issues to report....”
Manny Esquivia
Taylor Management
Great Job Guys. The Building Looks Great. We'll Call You Again When we Need Something Else Done for Sure....”
Clay Shumway, Camping Dir. Greater NY Councils
Boy Scouts of America

Warehouse & Manufacturing Portfolio

Prologis Cranbury- 25 S Middlesex Ave, Monroe Township, NJ 08831
 Warehouse
 Warehouse
 Warehouse
 Warehouse
 Warehouse
 Warehouse
 Warehouse
 Warehouse
 Warehouse
 Warehouse
 Warehouse
The Original Bagel Company in West Caldwell, NJ Interior Manufacturing Ceiling and Wall Painting
 Manufacturing
Braddock Metallurgical Manufacturing Plant Before
 Manufacturing
Braddock Metallurgical Manufacturing Plant Before
 Manufacturing
Braddock Metallurgical Manufacturing Plant During
 Manufacturing
Braddock Metallurgical Manufacturing Plant After
 Manufacturing
Braddock Metallurgical Manufacturing Plant Before
 Manufacturing
Braddock Metallurgical Manufacturing Plant During
 Manufacturing
Braddock Metallurgical Manufacturing Plant After
 Manufacturing
 Manufacturing
EFCO Sugar Silos (Before), Poughkeepsie, NY Sugar Silos Prior to Repainting.
 Manufacturing
EFCO Sugar Silos (After), Poughkeepsie, NY Sugar Silos After Pressure Washing, Spot Power Tool Cleaning to Bare Metal and application of an Epoxy/Polyurethane Coating System.
 Manufacturing
Ready to Get Started?
Fill out our Estimate form or give us a call at (866) 596-0349

Please complete all fields

Photos of the project (optional)

#}